View SDB1204150MZF_4429193.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SMD POWER INDUCTORS
1. PART NO. EXPRESSION :
SDB1204 SERIES
SDB12043R3MZF
(a) (b) (c) (d)(e)(f)
(a) Series code (b) Dimension code (c) Inductance code : 3R3 = 3.3uH
(d) Tolerance code : M = 20% (e) X, Y, Z : Standard part (f) F : Lead Free
2. CONFIGURATION & DIMENSIONS :
B C E F I G I
A 12.50.3
3. SCHEMATIC :
4. MATERIALS : (a) Core : DR Ferrite Core h a d g b e (b) Core : SI Ferrite Core (c) Base : LCP (d) Wire : Enamelled Copper Wire (e) Tape : Mylar Tape (f) Terminal : Tinned Copper Wire f c (g) Adhesive : Epoxy (h) Ink : Bon Margue
5. GENERAL SPECIFICATION : a) Temp. rise : 40C Max. b) Rated current : Base on temp. rise & L/L0A = 20% Max. c) Storage temp. : -40C to +125C d) Operating temp. : -40C to +80C e) Resistance to solder heat : 260C.10secs
NOTE : Specifications subject to change without notice. Please check our website for latest information.
101
B 12.50.3 C 4.60 Max.
D
A
PCB Pattern Unit:m/m D 5.00.2 E 2.20.2 F 7.60.2 G 7.0 Ref. H 5.4 Ref. I 2.8 Ref.
H
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 1
SMD POWER INDUCTORS
6. ELECTRICAL CHARACTERISTICS : Part No. SDB12043R3MZF SDB12044R7MZF SDB12046R8MZF SDB1204100MZF SDB1204120MZF SDB1204150MZF SDB1204180MZF SDB1204220MZF SDB1204270MZF SDB1204330MZF SDB1204390MZF SDB1204470MZF SDB1204560MZF SDB1204680MZF SDB1204820MZF SDB1204101MZF SDB1204121MZF SDB1204151MZF SDB1204181MZF SDB1204221MZF SDB1204271MZF SDB1204331MZF Inductance ( H ) 3.320% 4.720% 6.820% 10.020% 12.020% 15.020% 18.020% 22.020% 27.020% 33.020% 39.020% 47.020% 56.020% 68.020% 82.020% 100.020% 120.020% 150.020% 180.020% 220.020% 270.020% 330.020% Test Frequency ( Hz ) 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K 1V / 100K
SDB1204 SERIES
RDC (m ) Max. 15 18 23 28 38 52 60 70 80 97 132 150 190 220 260 308 380 520 600 700 860 980
IDC (A) Max. 6.50 5.70 4.90 4.50 4.00 3.20 3.10 2.90 2.80 2.70 2.10 1.90 1.80 1.50 1.30 1.20 1.10 0.95 0.85 0.80 0.60 0.50
NOTE : Specifications subject to change without notice. Please check our website for latest information.
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 2
SMD POWER INDUCTORS
7. CHARACTERISTICS CURVES :
SDB1204 SERIES
@ TEMP. RISE VS. DC SUPERPOSITION RESPONSE CURVE
90 80 70 60 50
331M 101M 330M 100M 4R7M
t (C) 40
30 20 10 00 1 2 3 4 5 6 7 8 9
DC CURRENT (A)
@ INDUCTANCE VS. FREQUENCY RESPONSE CURVE
103 5 3
331M
@ INDUCTANCE VS. DC SUPERPOSITION RESPONSE CURVE
103 5 3
331M
102
101M
102
101M
L (uH)
5 3
330M
L (uH)
5 3
330M
1 10 5 3
100M
1 10 5 3
100M
4R7M
4R7M
100 10-3
35
10-2 3 5
10-1
35
100 3 5
101
35
102
100 10-3
35
10-2 3 5
10-1
35
100 3 5
101
35
102
FREQUENCY(MHZ)
DC CURRENT (A)
NOTE : Specifications subject to change without notice. Please check our website for latest information.
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 3
SMD POWER INDUCTORS
RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERINGS
10s max.
SDB1204 SERIES
255C 230C 180C 150C
Pre-heating 40s max.
Natural cooling
90 to 120s
8. PACKAGING INFORMATION : ( 1 ) CONFIGURATION T COVER TAPE 2.00.5
OC
OC
N
A
B
D
G
EMBOSSED CARRIER * CARRIER TAPE WIDTH : D
P:16 m/m
4 m/m
101
( 2 ) DIMENSIONS STYLE 13-24 A 330 B
101
101
101
101
Unit:m/m
C 130.5
D 24
G 26 +0
N 50 -0
T 30.4
210.8
( 3 ) Q'TY & G.W. PER PACKAGE INNER : REEL SERIES SDB1204 Q'TY (PCS) 600 G.W. (gw) 1900 STYLE 13-24 OUTER : CARTON Q'TY (PCS) 2400 G.W. (Kg) 11.1 SIZE (cm) 40 x 40 x 24
NOTE : Specifications subject to change without notice. Please check our website for latest information.
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 4
SMD POWER INDUCTORS
9. RELIABILTY AND TEST CONDITION :
SDB1204 SERIES
TEST ITEM
SOLDERABILITY
SPECIFICATION
MORE THAN 90% OF THE TERMINAL ELECTRODE SHALL BE COVERED WITH FRESH SOLDER.
TEST CONDITION
PREHEAT : 12525C FOR 60 SECONDS SOLDER : 99%Sn/0.3%Ag/0.7%Cu OR EQUIVALENT SOLDER TEMP. : 2455C FLUX : ROSIN DIP TIME : 41 SECONDS
THERMAL SHOCK TEST
INDUCTANCE SHALL NOT CHANGE MORE THAN 20%
ROOM TEMP. 15 MINUTES
-252C 30 MINUTES
( TEMP. CYCLE )
ROOM TEMP. 15 MINUTES TOTAL : 50 CYCLES
852C 30 MINUTES
HUMIDITY RESISTANCE TEST
TEMPERATURE : 402C HUMIDITY : 90 ~ 95% APPLIED CURRENT : PER SPEC. TIME : 500 HOURS
HIGH TEMP. RESISTANCE TEST
TEMPERATURE : 852C APPLIED CURRENT : PER SPEC. TIME : 500 HOURS
NOTE : Specifications subject to change without notice. Please check our website for latest information.
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 5
SMD POWER INDUCTORS
10. UL CARD :
SDB1204 SERIES
GUANGDONG CHINA
Mtl Dsg BC Coating Type TC __ __ __ ANSI Type __ TI
E54705 (M)
H D RTI Min UL94 Elec Mech H H V 4 C w/o A T Thk Flame with W 9 T R mm Class Imp 5 I Mtl Dsg Col Imp I I Liquid crystal plyester (LCP), designated "EKONOL" or "SUMIKASUPER", furnished in the form of pellets, (Contd)
E4008 , E400X NC , BK 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 130 130 130 130 130 220 220 220 130 220 220 220 130 130 130 130 130 130 130 130 130 130 130 130 130 180 200 200 130 180 200 200 130 130 130 130 130 130 130 130 130 130 130 130 130 220 240 240 130 220 240 240 130 130 130 130 130 130 130 130 ___ ___ 3 2 1 ___ 3 2 1 ___ 3 2 1 ___ 3 2 1 ___ 0 0 1 4 4 4 ___ 4 4 4 ___ 4 4 4 ___ 4 4 4 ___ 4 4 4 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 5 ___ ___ ___ 5 ___ ___ ___ 5 ___ ___ ___ 5
___ ___ ___ 4 ___ ___ ___ 4 ___ ___ ___ 4 ___ ___ ___ 4 ___ ___ ___ 4
E4008
NC , WT , BK
E4010
NC , BK
E400(Y)L , E4008L
NC , BK
E4810
NC , BK
NOTE : Specifications subject to change without notice. Please check our website for latest information.
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 6
SMD POWER INDUCTORS
10. UL CARD :
SDB1204 SERIES
TERAOKA SEISAKUSHO CO LTD 4-22 1-CHOME HIROMACHI SHINAGAWA-KU, TOKYO JAPAN
E56086 (S)
Flame returdant aramid paper tape, Cat. Nos. 512F+, 560F+, 565S+, 681S+. Flame returdant aramid paper tape, Cat. Nos. 560S+, 561S+, 562S+, rated 200 C. Flame returdant acetate cloth tape, Cat. Nos. 570F+, 571F+, 573F+. Flame returdant polyester film tape, Cat. Nos. 680F+, 684F. Flame returdant glass cloth tape, Cat. Nos. 510F+, 540S+, 541F+, 685S+. Flame returdant glass cloth tape, Cat. No. 54S, rated 200 C. Flame returdant cotton cloth tape, Cat. Nos. 590F+, 715F+. Flame returdant polyimide film tape, Cat. No. 650S+, rated 200 C. Flame returdant tellon tape, Cat. Nos. 841+, 846+. Flame returdant PVC tape, Cat. Nos. 305F+, 307F+, 380F+. Flame returdant polyester fiber tape, Cat. Nos. 511F+, 551F+. Flame returdant epoxy varnish impregnated polyester web tape, Cat. Nos. 530F+. Flame returdant epoxy varnish impregnated glass paper tape, Cat. No. 531F+. Flame returdant copper foil tape, Cat. No. 831S+. Flame returdant copper foil tape, Cat. No. 8321+. Flame returdant alumlnum foil tape, Cat. Nos. 833+, 834+. Epoxy varnish impregnated polyester non-woven fabric tape, cat. no. 530Frated 150 C. polyester film tape, Cat. Nos. 631S, 632S, rated 130 C. Flame returdant polyester film tape, Cat. No. 630F, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber tape Cat. No. 673F, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber/polyester film tape, Cat. No. 850F, rated 130 C. + - Subjected to Flame Retardant tests only. - Complies with Flame Retardent requirements when so marked. Mraking: Company name or "E56086" and catalog designation and "Flame Retardent" if applice, bie. brinted on the central paper or outer package.
( A card )
R
D11/0114874 51
NOTE : Specifications subject to change without notice. Please check our website for latest information.
07.05.2008
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 7

▲Up To Search▲

Price & Availability of SDB1204150MZF

	To Download SDB1204150MZF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .